Power Master F/R
Download PM F/R 
user manual 
The PM F/R is a forward/reverse or forward/reverse/brake speed control that was designed for marine applications running on 7.2 to 30 V (maximum). It can handle up to 90 Amps forward and 50 Amps reverse continuously. Very high power and quick response with built in BEC. With brake included, it can also be used for car applications.
Features
·
High Voltage (30 Vdc maximum, 18 cells max recommended. 2 x 12V
lead acid batteries ideal)
·
High variable current (130Amps for 10 secs, 90Amps continuous forward, 75
Amps for 10 secs, 50 Amps continuous reverse)
·
BEC, 4 amps peak.
·
Programmed for maximum power output and quick response.
·
Very low on resistance (1.4mW
or 0.0014W
forward) for minimum loss and high available currents.
·
Brake/reverse resistance of 2.5 mW
or 0.0025W
·
Small package, lightweight. (47 x 25 x 8mm without mounting tags)
Slightly larger cased version available for cars)
·
Micro controller controlled full digital operation for proper performance
under adverse conditions (dust, moisture, electrical interference and
vibration).
·
Innovative design.
·
Uses the very latest and best available surface mount components for the
highest possible power output from the smallest package.
·
Programmable for brake/reverse, power, neutral positions, ramp up &
initial brake (brake during neutral). Also programmable without brake (as
supplied) for marine use.
·
No Radio Signal failsafe. Applies brake after 1/8th sec. without radio
signal, and flashes LED.
·
Safe start feature where PM F/R will not start without passing through
Neutral.
·
LED which shows radio signal failure, full throttle, neutral, full
brake/reverse, and assists in programming.
·
Programmable soft power up to assist in preventing wheel spin. Ramping
can be from 0 sec to approx. 0.6 sec. for full throttle range (if used).
·
Programmable Initial Brake. Initial Brake from 0 to 50% of full brake
· Switch less programming.
Price
AUD $200 + postage.