Dragmaster TWO
Download DM 2 
user manual 
Dragmaster was developed in conjunction with PM7. Because Drag Cars spend as much of their time under brakes as they do driving, Dragmaster has been built with incredible brakes. It offers all the same great power and programming features of the PM6 with addition of the following features:-
- The Brake has been increased to 75 Amps continuous with an on resistance of 1 milliohms (0.001 Ohms). (PM6 is 35 milliohms).
- The voltage has been increased to 30V from 18V
- The BEC circuit has been increased to 4 Amps peak.
- The case has been made thinner to 10mm thick.
Specifications
Dimensions
28 x 24 x 10 mm for h version.
33 x 24 x 10 mm for v version.
Only cased version available
Weight
~7g without leads
Rating 6 - 30Vdc, 190 Amp (10 seconds) 250 Amp (2 seconds)
Max. current 644 Amp continuous, 2480 peak (mosfet spec)
Tested continuous current 120 Amp
Suitable Motor Any
On Resistance 0.7m Ohms or 0.0007 Ohms
Brake On Resistance 1 milliohms (0.001 Ohms)
BEC
radio connection
5Vdc, 4Amp peak
PWM
frequency
4 kHz
Throttle
Fully variable from 12% to full
Ramping
Adjustable 0 to 0.6 seconds (8
Brake
Fully variable from Initial Brake
Initial
Brake
Adjustable 0 - 50% (8 steps)
Maximum mosfet temp. 60°C
Price
Straight or right angled lead exit AUD $190 + postage.
Switched + AUD $5 Availability query